• The installation instructions are always included in "package no. 1".
• With the basic cupboards, the contents of packages no. 1+2 are needed to assemble the cupboard (but this does not have to be done where the cupboard will be placed). The contents of package no. 3 are needed to finish the final components of the cupboard and to place it in its permanent location.
• These handy instructional videos explain step by step how to assemble the WSCS1462 and WSTT185.

Yes! This is important to guarantee safety. Not sure whether your wall is suitable for wall mounting? Contact our customer service team for advice.

Absolutely. You can make a cut-out wherever you need it. If, for example, you want to have the faucet next to the cupboard, you can make a cut-out in the side of the cupboard for the water supply. The base plate ends at the wall. If the water supply extends slightly above the floor, you can easily make a notch in the base plate for connecting the water supply hose.

Yes! A compact and flat wall faucet fits behind the washing machine. An example can be seen here. If you have a different type of wall faucet, there are three options: 

1. You can choose to turn the faucet a quarter of a turn, so that everything stays concealed in the cupboard.
2. You can place the faucet next to the cupboard, so that you can easily access it. 
3. You can install the cupboard 5cm (2 inches) from the wall, so that there is a 10 cm (3.9 inches)-wide space for pipes. See the technical drawings.

• For the WSCS1462, the drain and faucet should preferably be installed at a height of 120 cm (47.3 inches).
• For the WSTT185, the drain and faucet should be installed at a height of 60-80 cm (23.7x31.5 inches.)
• Make sure the power cables are at least 10 cm (3.9 inches) above the drain and faucet. See an example here.
• Regarding the WSTT185, make sure there is enough space for the dryer, preferably at a height of around 120 cm (47.3 inches).

Washtower does not offer an assembly service. However, we’ve created helpful instruction guides and videos to make the assembly process as straightforward as possible. For more information and step-by-step guidance, visit our assembly assistance page.

The scope of delivery includes the assembly instructions (with QR code to practical assembly videos), the various parts of the washing machine cupboard and the assembly material (screws, wall anchors, anti-tilt device, height-adjustable feet, etc.). The various parts of the washing machine cupboard are packed in individual packages. The assembly instructions are in the package of the respective cabinet.

You will need the following tools:

• Hammer
• Drill
• Cordless screwdriver
• Screwdriver
• Spanner
• Measuring tape
• Spirit level
• Protractor (not absolutely necessary)
• Clamp (not absolutely necessary)

Read the assembly instructions carefully and follow each step. In addition, watch the assembly video.
Place something soft (e.g. a towel or carpet) on the floor to protect the parts of your washing machine cupboard from scratches during assembly. 

The easiest way to assemble your washing machine cupboard is with two people.